| MRC |
Requirement Statement |
Characteristics |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ABAF |
EXPANSION DEVICE |
SERRATED STEM-TYPE W |
| AASB |
FASTENER LENGTH |
0.651 INCHES MINIMUM AND 0.681 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.531 INCHES MINIMUM AND 0.594 INCHES MAXIMUM |
| AAZG |
HEAD MAJOR DIAMETER |
0.378 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE BODY OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE BODY OR MIL-S-5626 MIL SPEC 3RD MATERIAL RESPONSE BODY |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE STEM OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE STEM OR MIL-S-5626 MIL SPEC 3RD MATERIAL RESPONSE STEM |
| MATT |
MATERIAL |
STEEL COMP 303F SLEEVE |
| MATT |
MATERIAL |
STEEL COMP 4130 BODY OR STEEL COMP 8740 BODY OR STEEL COMP 4140 BODY |
| MATT |
MATERIAL |
STEEL COMP 4130 STEM OR STEEL COMP 8740 STEM OR STEEL COMP 4140 STEM |
| CQBC |
MINIMUM TENSILE STRENGTH |
180000 POUNDS PER SQUARE INCH |
| ABAJ |
LUBRICATION |
DRY FILM OR WAX |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5641 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE |
| AAZE |
SHANK DIAMETER |
0.213 INCHES MINIMUM AND 0.215 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
THREADED SELF-PLUGGING SHANK W/SLEEVE |
| CQSX |
SHEAR STRENGTH |
5240 DOUBLE POUNDS PER SQUARE INCH |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE BODY |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE STEM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| SFTT |
SURFACE TREATMENT |
CADMIUM BODY |
| SFTT |
SURFACE TREATMENT |
CADMIUM SLEEVE |
| SFTT |
SURFACE TREATMENT |
CADMIUM STEM |
