| MRC |
Requirement Statement |
Characteristics |
| ADFY |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH |
0.686 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| AAWY |
COUNTERBORE DIAMETER |
0.255 INCHES MAXIMUM NUT |
| ADFW |
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER |
0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM |
| CBBL |
FEATURES PROVIDED |
FLOATING NUT |
| CQFM |
HARDNESS RATING |
55.0 SHORE DUROMETER A MINIMUM AND 70.0 SHORE DUROMETER A MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-R-25988,TYPE 2,CLASS 1 MIL SPEC SINGLE MATERIAL RESPONSE SEAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5059 MIL SPEC ALL MATERIAL RESPONSES WASHER |
| MATT |
MATERIAL |
IRON ALLOY 660 NUT |
| ABTB |
MOUNTING HOLE DIAMETER |
0.098 INCHES MINIMUM AND 0.113 INCHES MAXIMUM |
| ADFU |
MOUNTING HOLE ARRANGEMENT STYLE |
2 HOLES |
| CQJX |
NOMINAL THREAD SIZE |
0.190 INCHES |
| ADFK |
NUT COUNTERBORE DEPTH |
0.100 INCHES MINIMUM NUT |
| ADEA |
NUT HEIGHT |
0.404 INCHES MINIMUM AND 0.533 INCHES MAXIMUM |
| ACVN |
NUT LENGTH |
0.984 INCHES MAXIMUM |
| ADFP |
NUT MOUNTING PROVISION |
STRAIGHT HOLES |
| ACTA |
NUT STYLE |
PLATE |
| AAUM |
LOCKING FEATURE |
PREVAILING TORQUE ALL METAL DESIGN |
| ABAJ |
LUBRICATION |
DRY FILM LUBRICANT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5525 ASSN STD SINGLE MATERIAL RESPONSE NUT OR AMS 5735 ASSN STD SINGLE MATERIAL RESPONSE NUT |
| ADEB |
PLATE THICKNESS |
0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM |
| ADEC |
PLATE WIDTH |
0.562 INCHES MAXIMUM |
| ABKW |
OVERALL HEIGHT |
0.640 INCHES MAXIMUM |
| BZRR |
THREAD SERIES |
UNJF |
| ZZZK |
SPECIFICATION/STANDARD DATA |
76301-ST3-493 MANUFACTURERS STANDARD |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| AZKQ |
TEMP RATING |
-65.0 DEG FAHRENHEIT MINIMUM AND 350.0 DEG FAHRENHEIT MAXIMUM |
| AAJD |
THREAD CLASS |
3B |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
