| MRC |
Requirement Statement |
Characteristics |
| ABAF |
EXPANSION DEVICE |
PLAIN STEM-TYPE T |
| AASB |
FASTENER LENGTH |
0.409 INCHES MINIMUM AND 0.439 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.251 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.030 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| AAZG |
HEAD MAJOR DIAMETER |
0.238 INCHES MINIMUM AND 0.262 INCHES MAXIMUM |
| HEAT |
HEAT TREATMENT |
AS FABRICATED OVERALL |
| AASK |
HEAD STYLE |
OVAL/TRUSS |
| MATT |
MATERIAL |
STEEL COMP 1006 BODY OR STEEL COMP 1008 BODY OR STEEL COMP 1009 BODY OR STEEL COMP 1010 BODY |
| MATT |
MATERIAL |
STEEL COMP 1030 MANDREL OR STEEL COMP 1033 MANDREL OR STEEL COMP 1034 MANDREL OR STEEL COMP 1035 MANDREL OR STEEL COMP 1536 MANDREL OR STEEL COMP 1037 MANDREL OR STEEL COMP 1038 MANDREL OR STEEL COMP 1039 MANDREL OR STEEL COMP 1040 MANDREL OR STEEL COMP 1 |
| AAZE |
SHANK DIAMETER |
0.124 INCHES MINIMUM AND 0.128 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
PULL THROUGH HOLLOW SHANK |
| CQSX |
SHEAR STRENGTH |
280 SINGLE POUNDS PER SQUARE INCH |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-Z-325,TY 2,CL 3 FED SPEC 1ST TREATMENT RESPONSE BODY OR QQ-P-416 FED SPEC 2ND TREATMENT RESPONSE BODY OR QQ-P-416 MIL SPEC 1ST TREATMENT RESPONSE BODY OR QQ-P-416 FED SPEC 4TH TREATMENT RESPONSE BODY OR MIL-P-16232,TY Z,CL 2 OR 4 MIL SPEC 5TH TREATMENT |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-Z-325,TY 2,CL 3 FED SPEC 1ST TREATMENT RESPONSE MANDREL OR QQ-P-416 FED SPEC 2ND TREATMENT RESPONSE MANDREL OR QQ-P-416 MIL SPEC 1ST TREATMENT RESPONSE MANDREL OR QQ-P-416 FED SPEC 4TH TREATMENT RESPONSE MANDREL OR MIL-P-16232 TY Z,CL 2 OR 4 MIL SPEC 5 |
| SFTT |
SURFACE TREATMENT |
ZINC BODY AND CHROMATE BODY OR CADMIUM BODY OR CADMIUM BODY AND CHROMATE BODY OR CADMIUM BODY AND PHOSPHATE BODY OR PHOSPHATE ZINC BODY |
| SFTT |
SURFACE TREATMENT |
ZINC MANDREL AND CHROMATE MANDREL OR CADMIUM MANDREL OR CADMIUM MANDREL AND CHROMATE MANDREL OR CADMIUM MANDREL AND PHOSPHATE MANDREL OR PHOSPHATE ZINC MANDREL |
