| MRC |
Requirement Statement |
Characteristics |
| ADDU |
DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END |
0.205 INCHES MINIMUM FIRST HOLE |
| ADDU |
DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END |
0.235 INCHES MAXIMUM SECOND HOLE |
| ADCX |
DISTANCE FROM SERRATED PORTION TO END OF STUD THREAD |
0.250 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| ADCT |
DISTANCE FROM SERRATED PORTION TO NUT END |
2.985 INCHES MINIMUM AND 3.015 INCHES MAXIMUM |
| ADCU |
DISTANCE FROM SERRATED PORTION TO STUD END |
0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM |
| ADDV |
COTTER PIN HOLE DIAMETER |
0.141 INCHES NOMINAL FIRST HOLE |
| MATT |
MATERIAL |
STEEL |
| CQJX |
NOMINAL THREAD SIZE |
0.562 INCHES NUT THREAD |
| CQJX |
NOMINAL THREAD SIZE |
0.625 INCHES STUD THREAD |
| AAUM |
LOCKING FEATURE |
RING, LOCK SERRATED |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5734 ASSN STD SINGLE MATERIAL RESPONSE |
| CWKL |
SERRATION INCLUDED ANGLE |
111.0 DEGREES NOMINAL |
| ADDW |
SERRATION QUANTITY |
26 |
| ABHP |
OVERALL LENGTH |
3.970 INCHES MINIMUM AND 4.030 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNF NUT THREAD |
| THSD |
THREAD SERIES DESIGNATOR |
UNS STUD THREAD |
| STYL |
STYLE DESIGNATOR |
LOCKED IN |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES NUT THD |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| AAJD |
THREAD CLASS |
3A NUT THREAD |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND NUT THREAD |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND STUD THREAD |
| AASA |
THREAD LENGTH |
0.705 INCHES MINIMUM STUD THREAD AND 0.735 INCHES MAXIMUM STUD THREAD |
| AASA |
THREAD LENGTH |
0.925 INCHES MINIMUM NUT THREAD AND 0.955 INCHES MAXIMUM NUT THREAD |
| CMLP |
THREAD QUANTITY PER INCH |
11 STUD THREAD |
| CMLP |
THREAD QUANTITY PER INCH |
18 NUT THREAD |
| AAJE |
THREAD PITCH DIAMETERS |
+0.5674/+0.5699 INCHES STUD THREAD |
