| MRC |
Requirement Statement |
Characteristics |
| CRHT |
DISTANCE FROM CENTER OF EYE TO SHANK END |
1.046 INCHES MINIMUM AND 1.077 INCHES MAXIMUM |
| AATK |
EYE INSIDE DIAMETER |
0.190 INCHES MINIMUM AND 0.192 INCHES MAXIMUM |
| CWXM |
EYE OUTSIDE WIDTH |
0.421 INCHES MINIMUM AND 0.453 INCHES MAXIMUM |
| AAUA |
EYE STOCK THICKNESS |
0.089 INCHES MINIMUM AND 0.099 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE O |
| MATT |
MATERIAL |
STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 8630 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 4130 OVERALL OR STEEL OVERALL |
| AHYM |
NOMINAL THREAD DIAMETER |
0.190 INCHES |
| AATR |
SHANK LENGTH |
0.601 INCHES MINIMUM AND 0.688 INCHES MAXIMUM |
| AAVH |
SHOULDER DIAMETER |
0.422 INCHES MINIMUM AND 0.454 INCHES MAXIMUM |
| AATP |
SHOULDER THICKNESS |
0.046 INCHES MINIMUM AND 0.078 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
1.295 INCHES MINIMUM AND 1.327 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
EYE COUNTERSINK 0.030 IN.BY 45 DEG BOTH SIDES |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| STYL |
STYLE DESIGNATOR |
ROUND, CLOSED W/SHOULDER |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.391 INCHES MINIMUM AND 0.437 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
