| MRC |
Requirement Statement |
Characteristics |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
1.281 INCHES NOMINAL FIRST HOLE |
| ZZZW |
DEPARTURE FROM CITED DOCUMENT |
THREAD T PER MIL-S-7742 EXCEPT MAJOR DIA IS NOT TO EXCEED MAX ALLOW BOLT SHANK DIA |
| AASB |
FASTENER LENGTH |
1.406 INCHES NOMINAL |
| AAVZ |
GROOVE DIAMETER |
0.100 INCHES NOMINAL |
| AASL |
HEAD DIAMETER |
0.297 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.062 INCHES MINIMUM AND 0.094 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
BUTTON |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE OR MIL-S-8695 MIL SPEC 6TH M |
| MATT |
MATERIAL |
STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4140 OR STEEL COMP 4130 OR STEEL COMP 4037 OVERALL |
| AHYM |
NOMINAL THREAD DIAMETER |
0.138 INCHES |
| CXCY |
III PART NAME ASSIGNED BY CONTROLLING AGENCY |
CLEVIS BOLT |
| ABQZ |
INTERNAL DRIVE STYLE |
SLOT |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.038 INCHES MINIMUM AND 0.048 INCHES MAXIMUM FIRST HOLE |
| AAWU |
SINGLE SHEAR STRENGTH |
1060 POUNDS PER SQUARE INCH |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM AND CHROMATE OVERALL |
| AASA |
THREAD LENGTH |
0.250 INCHES MINIMUM |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLP |
THREAD QUANTITY PER INCH |
40 |
