| MRC |
Requirement Statement |
Characteristics |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
1.984 INCHES MINIMUM FIRST HOLE AND 2.016 INCHES MAXIMUM FIRST HOLE |
| AASB |
FASTENER LENGTH |
2.156 INCHES MINIMUM AND 2.188 INCHES MAXIMUM |
| AAVZ |
GROOVE DIAMETER |
0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
26.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| AASU |
HEAD HEIGHT |
0.140 INCHES MINIMUM AND 0.172 INCHES MAXIMUM |
| AASL |
HEAD DIAMETER |
0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
BUTTON |
| MATT |
MATERIAL |
STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 8630 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 4130 OVERALL OR STEEL COMP 4037 OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
125000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.312 INCHES |
| ABQZ |
INTERNAL DRIVE STYLE |
SLOT |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE |
| AAWU |
SINGLE SHEAR STRENGTH |
5750 POUNDS PER SQUARE INCH |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.328 INCHES MINIMUM AND 0.392 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
24 |
