| MRC |
Requirement Statement |
Characteristics |
| CRHT |
DISTANCE FROM CENTER OF EYE TO SHANK END |
3.270 INCHES MINIMUM AND 3.290 INCHES MAXIMUM |
| AATY |
DISTANCE FROM SHOULDER TO EYE CENTER |
2.580 INCHES MINIMUM AND 2.600 INCHES MAXIMUM |
| AATW |
DISTANCE FROM SHOULDER TO THREAD END |
0.545 INCHES MINIMUM AND 0.575 INCHES MAXIMUM |
| CTWF |
DISTANCE FROM THREADED END TO SHANK HOLE CENTER |
0.078 INCHES MINIMUM AND 0.098 INCHES MAXIMUM FIRST HOLE |
| AATK |
EYE INSIDE DIAMETER |
0.312 INCHES MINIMUM AND 0.314 INCHES MAXIMUM |
| CWXM |
EYE OUTSIDE WIDTH |
0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| AAUA |
EYE STOCK THICKNESS |
0.290 INCHES MINIMUM AND 0.294 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| MATT |
MATERIAL |
STEEL COMP 4340 OVERALL |
| AHYM |
NOMINAL THREAD DIAMETER |
0.250 INCHES |
| CXCY |
III PART NAME ASSIGNED BY CONTROLLING AGENCY |
NAVY SPECIAL PROJECT |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.065 INCHES MINIMUM AND 0.072 INCHES MAXIMUM FIRST HOLE |
| AAVK |
SHOULDER LENGTH |
0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
3.582 INCHES MINIMUM AND 3.602 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| STYL |
STYLE DESIGNATOR |
ROUND, CLOSED |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.275 INCHES NOMINAL |
| CMLP |
THREAD QUANTITY PER INCH |
28 |
